MAP Controllers

The MAP (MAP1 and MAP2) controllers can be set to work with CloudACS or First Access solutions. Only one mode can be run at a time. One of the biggest is that users can easily move between solutions as their needs change.

The MAP2 Modular Access Panel is totally self-contained and puts support for up to 8 doors and 100,000 users. It utilizes a powerful quad core processor, is network ready and contains status LEDs making it simple to commission and maintain. The MAP2 is factory provisioned for 2, 4, 6, or 8 doors and can be field upgraded up to a maximum of 8 doors by simply purchasing a new provisioning code. When you are ready to upgrade, all you will have to add is readers and locks. You only pay for what you need!
There are many benefits to using the same MAP1 building block for CloudACSTM and First Access® solutions. One of the biggest is that users can easily move between solutions as their needs change. If you start with a First Access® system, you can easily migrate to CloudACSTM. If you no longer require the CloudACSTM solution, you can easily change back to First Access®. No other access control manufacturer can offer this kind of future proofing.

MAP2 3 Solutions

Features

FEATURES*  MAP2 (MODULAR ACCESS PANEL)
Doors 2, 4, 6 or 8
Onboard Network TCP/IP Yes
Self-contained Yes
Audit Buffer (transactions) 10,000
Binary Wiegand Support up to 64 bits
Facility Codes (FC) Unlimited
Card Capacity 100,000 with any FC or ID
Multiple Credentials Per User Yes - 5
Binary Wiegand Support ANY format up to 64 bits
37-bit Cansec Support Yes
26-bit Support Yes
Corporate 1000 - 35/48-bit Yes
Onboard Auto Void/Validate Yes
Schedule Time Resolution 1 min
Access Schedules 256
Unlock Schedules 4
Output Schedules 8
Shunt Schedules 8
Manual Shunt Yes
Scheduled Commands Yes
Low 12V DC Power Warning Yes

*NOTE: Not all features and capacities are supported on all solutions.

Typical Configuration

MAP2 Configuration

Specifications

Dimensions 7” (L) x 7” (W) [18 cm (L) x 18 cm (W)]
Weight
300 g (10.7 oz)
Operating Temperature 
-20˚C to 60˚C  [-4˚F to 140˚F]
Power Requirement
12 VDC / 1.5 A [Max. Current (including 8 proximity readers with 100 mA each)]
Warranty 5 years

Part Numbers:

DOOR CONTROL:

CA-MAP22H_   (MAP2 2-Door Configuration with Aux I/O)
CA-MAP24H_   (MAP2 4-Door Configuration with Aux I/O)
CA-MAP26HF   (MAP2 6-Door Configuration with Aux I/O, available for First Access only)
CA-MAP28HF   (MAP2 8-Door Configuration with Aux I/O, available for First Access only)
CA-MAP20HF   (MAP2 16-Input/16-Output Configuration, available for First Access only)
 
Hardwired Applications Provisioning Upgrades:
 
CA-MAP22U4H_    (MAP2 2-Door Provisioning Upgrade to 4-Door Configuration)
CA-MAP24U6HF    (MAP2 4-Door Provisioning Upgrade to 6-Door Configuration, available for First Access only)
CA-MAP26U8HF    (MAP2 6-Door Provisioning Upgrade to 8-Door Configuration, available for First Access only)

 

“_” replaced with:
F - First Access
C - CloudACS

ELEVATOR CONTROL:

 MAP2 Elevator Control PN

CA-MAP2E16   (MAP2 Elevator Controller - 16 floor)
CA-MAP2E32   (MAP2 Elevator Controller - 32 floor)
CA-MAP2E48   (MAP2 Elevator Controller - 48 floor)
CA-MAP2E64   (MAP2 Elevator Controller - 64 floor)

Downloads