CanProx ReceiverCanProx Receivers

Receives signals from the CanProx Dual Technology RF Transmitter from a range of up to 100 feet (CP2RX) or 200 feet (CP4RX). The receiver is programmed with Wiegand format and fully integrated with Cansec’s access control system software for full feature capability.


 

 

Features and Benefits

  • Current draw of 80 mA typical @ 12VDC (CP2RX) or 120 mA typical @ 12VDC (CP4RX)
  • Housed in a weather-resistant enclosure
  • Dimensions are 3.3 x 3.3 x 1.9 inches (CP2RX) or 6.3 x 3.4 x 2.3 inches (CP4RX)
  • Includes a drill template providing mounting provisions to a North American or European wall box, as well as pre-drilled holes in the four corners allowing installation to a flat surface
  • Includes multi-colour LED indicators
  • Designed to output Transmitter data over 2 (CP2RX) or 4 (CP4RX) separate Wiegand output lines
  • Formatting of outputted Wiegand data is dependent upon the specific programmed format of the individual CanProx One transmitter

Part Numbers

  CanProx Receiver

CanProx Receiver

CA-CP2RX CA-CP4RX

 

 

 

 

 

 

Downloads

433 MHz Transmitters

There’s a lot of utility packed into this convenient little click-operated transmitter. While offering long-range wireless access control, it doubles as a short-range credential for most HID and AWID 125kHz proximity readers.

Features and Benefits
  • Available in 2 or 4-button models
  • CanProx wireless receivers are compatible with all access control systems
  • Convenient 2-in-1 click-operated transmitter allows dual access control in a single device
  • Long-range transmission is ideal for access from vehicles – no need to lower the window
  • Adjustable read range, ideal for a variety of applications including parking gates, lobby access and arming/disarming alarm systems
  • Doubles as a short-range credential for most HID and AWID 125 kHz proximity readers*
  • Encrypted rolling code transmission guards against code grabbing and scanning
  • Mounted on a key ring for easy handling

* HID-compatible transmitters must be used with HID-compatible readers, and AWID-compatible transmitters must be used with AWID-compatible readers.

Part Numbers

433 MHz Transmitters
4-Button
433 MHz Transmitters
2-Button
CA-CP1TXFOB-37A (37-bit, 125 kHz AWID Compatible)
CA-CP1TXFOB-26A (26-bit, 125 kHz AWID Compatible)  
CA-CP1TXFOB-37H (37-bit, 125 kHz HID Compatible)
CA-CP1TXFOB-26H(26-bit, 125 kHz HID Compatible)
CA-CP1TXFOB2-37A (37-bit, 125 kHz AWID Compatible)
CA-CP1TXFOB2-26A (26-bit, 125 kHz AWID Compatible)
CA-CP1TXFOB2-37H (37-bit, 125 kHz HID Compatible)
CA-CP1TXFOB2-26H(26-bit, 125 kHz HID Compatible)